PromaPrint 3D
Printable white Flex with 3D effect !
The PromaPrint 3D is a thick printable flex (700 microns) that gives a 3D effect to your transfers on cotton, polyester, acrylic, and some nylons *.
Give volume to your markings!
This volume perceptible to the touch brings real added value to your markings, with an trendy effect ! It makes it possible to assert the logo of a mark on a shoe, a polo or a cap. Its thickness of 700 microns limits the possibilities in terms of shrapness, but it will give a sportswear effect to all the logos, letterings, numbers and graphic elements on tee-shirts, sweats, backpack, etc. !
The PromaPrint 3D avoids the migration of sublimation on polyester garment. It can be hot transferred and cut with a plotter or a cutting table. It remains soft to the touch and keeps its satin look even printed.
The PromaPrint 3D is available in rolls :
Width : 50 cm
Lenght : 5 / 25 ML
Machine Wash 60 ° C - approximately 50 washes**
* Tests must be carried out before any production
** Manufacturer Infos
Caracteristic(s) :
Thickness : 700 microns
Washing : up to 60°C
Washing : up to 60°C
Conditionning) :
Rolls :
- Width 50 cm
- Length 5 / 25 ML
- Width 50 cm
- Length 5 / 25 ML
Marking Condition(s) :
• Temperature 150°C
• Time 25 secondes
• Cold peel
• Time 25 secondes
• Cold peel